1997-2003 FORD 7.3 Powerstroke Diesel Glow Plug Injector harness pigtail Harness

1997-2003 FORD 7.3 Powerstroke Diesel Glow Plug Injector harness pigtail Harness

1997 1998 1999 2000 2001 2003 Year Model 7.3L FORD Powerstroke Glow Plug Injector harness pigtail

Pictures are of actual item, please check them against your before buying. Ford uses 2 different designs in some cases

Qty-1 Lead/Plug Connector Harness

On the 7.3L Powerstrokes is that the main connector at the valve cover melts down. This connector handles the current for both the glow plugs and injectors (both of which are under the valve covers.) The purpose of this kit is to repair the connector on the outside of the valve cover which is really a part of the engine wiring harness. This will save you big $$ as opposed to buying a whole new engine wiring harness. Often times when this failure occurs, you will also need to replace the valve cover gasket, and the internal harnesses under the valve cover as well to prevent a repeat failure (sometimes the failure is due to oil seeping into the connector). You might also consider replacing the glow plugs while you have everything apart (especially since a shorted glow plug occasionally will cause the problem).

This kit will work on mid 1997 and up to 2003 7.3L Powerstrokes ONLY. If you have a 1997 model you need to check the number of electrical connectors you have per valve cover. If you have a single connector per side, this is the correct kit.

10" Lead Wires

In some cases wire colors may vary

459C